Resawing Logs On Bandsaw

TedsWoodworking Plans and Projects

Discover free woodworking plans and projects for resawing logs on bandsaw. Start your next project for resawing logs on bandsaw with one of our many woodworking plans. Woodworking project plans available for immediate PDF download.

Woodworking Projects & Plans for "Resawing Logs On Bandsaw":

Resawing Mesquite

Resawing Mesquite

Mesquite log given to me by Galvbay, Lennox Trimaster Carbide tipped.035" 2-3 tpi, 11'-10" blade for Rikon 18" bandsaw...

Bandsaw Log Cutting Jig For Craftsman 14 Inch Bandsaw

Bandsaw Log Cutting Jig For Craftsman 14 Inch Bandsaw

In this video I continue adding accessories to my Craftsman 14 inch bandsaw. Here I demonstrate the resaw jig I used to cut lumber from whole logs...

Resawing A Pearwood Log

Resawing A Pearwood Log

This video illustrates the use of a sled on a bandsaw to cut a short pearwood log into slabs...

Bandsaw Resaw Sled

Bandsaw Resaw Sled

Bandsaw resaw sled...

Milling A Log On The Bandsaw (a Bit Of Bandsaw Abuse)

Milling A Log On The Bandsaw (a Bit Of Bandsaw Abuse)

Videos relating to this one:The physics of bandsaw resawing:Cutting up a log on the bandsaw (2010)Running the sawmill again:Resawing shelves to guitar sides...

Resaw And Bookmatch Walnut On Bandsaw

Resaw And Bookmatch Walnut On Bandsaw

Using a band saw I'm going to re-saw a solid Walnut board and 12'' tall and 1.5'' thick into 2 boards that will feature a beautiful grain book match. This board is to be used as the underside of a custom rocking chair seat. If you like my videos you can help support me by shopping on Amazon Canada o...

Resawing Logs On A Hammer Bandsaw

Resawing Logs On A Hammer Bandsaw

Here i am successfully trying to cut a part of a walnut tree into some nice boards which would have been a waste to burn...

Luja Sawtech - Optimisation Of A Ake 245 Resaw Band Saw

Luja Sawtech - Optimisation Of A Ake 245 Resaw Band Saw

Results from the optimisation of a AKE 245 log band sawThe Mill is only processing 4, 9 m logs, unsorted Achieved increased feed speed by 19%Facts:Blade speed: 47m/sec - Tooth pitch: 45 mmCut per tooth: from 1, 32mm in 200+ mm log to 0, 77mm in 460- mm logWood: Spruce from mid SwedenFor more informa...

Movie Resaw Band Saw Mesquite Log

Movie Resaw Band Saw Mesquite Log

Movie Resaw Band Saw Mesquite Log...

Resawing On A Bandsaw

Resawing On A Bandsaw

Learn how to resaw on a bandsaw to maximize stock and save some money. Resawing allows you to use more material for your projects and also gives you the flexibility to book match pieces for an interesting twist on your next project. Please visit us at or follow us on twitter to see the latest projec...

The Physics Of Bandsaw Resawing

The Physics Of Bandsaw Resawing

Explaining the physics of resawing on the bandsaw, and what leads to blade drift...

Resawing Firewood Into Lumber

Resawing Firewood Into Lumber

This was just another of my many tests. Before I started finding fallen trees and branches around LA, building up my stockpile, I had no wood to run through my bandsaw. In preparation for resawing, I picked up a couple of firewood bundles from local stores. They've sat for months, waiting for me to ...

511 Resawing On The Bandsaw

511 Resawing On The Bandsaw

Recently I've been doing a lot of resawing on my bandsaw. Resawing is a great way to get thin material for a project versus wasting away the material by simply running it through a thickness planer or purchasing it pre-thicknessed (which probably means it's been sitting around for a while and is bow...

Woodcraft Demo Series - Band Saw Tuning And Resawing

Woodcraft Demo Series - Band Saw Tuning And Resawing

Woodcraft Demo Series - Band Saw Tuning and Resawing In this episode we show you how to align your band saw for proper resawing...

Bandsaw Log Cutting Jig

Bandsaw Log Cutting Jig

A jig to allow cutting of logs on a bandsaw. Cutting can be done either the length of the log or crosscut...

First Use Of My New Resawing Jig

First Use Of My New Resawing Jig

A resawing jig is used for cutting logs into planks. Specifically, you create over-thick slabs which you then let dry for a long time (1 year per inch of thickness), then joint and plane, rip and crosscut as needed. In this way, logs can be turned into lumber, just like the kind of stuff you buy at ...

Resawing Logs On The Bandsaw | Rozcinanie Bali Na Pile Taśmowej

Resawing Logs On The Bandsaw | Rozcinanie Bali Na Pile Taśmowej

Material: walnut & cherry, Bandsaw: Makita lb 1200 fMateria: orzech & winia, Pia tamowa: Makita lb 1200 f...

How To Set Up Your Bandsaw For Resawing

How To Set Up Your Bandsaw For Resawing

So here I am going to show you how I setup my Bandsaw for more detailed video and more info on drift and co-planner, check out Alex Snodgrass. Here is the link to that video...

My Diy Bandsaw At Work

My Diy Bandsaw At Work

Uncut raw bandsaw work!cut big log in 4 kwarter sections with the chain saw with saw frame and im resawing those with the bandsaw made the bandsaw by using some old vertical bandsaw and using most of its good partsif you have any ideas or tips your welcome to leave them belowthanks,...

Resawing European Olive Into Turning Blanks

Resawing European Olive Into Turning Blanks

Some tree trimmers near where I live and work were cutting down a European olive tree so the company next to it could put in a security camera. I stopped to talk with them, and they asked if I wanted "the firewood." I wanted it for woodworking, but I just said "yes." Flash forwar...

Homemade Bandsaw Fence And Re-sawing Small Logs On 9" Band Saw

Homemade Bandsaw Fence And Re-sawing Small Logs On 9" Band Saw

Homemade Bandsaw Fence And Re-sawing Small Logs on 9" Band Saw I put up a homemade fence on my band saw using my circular saw fence. Resawing small lumber like this is perfectly capable of being accomplished on a cheap 9" Ryobi band saw...

Resaw On The Bandsaw Without Gadgets

Resaw On The Bandsaw Without Gadgets

I show you that you can resaw on the bandsaw without any special tools or gadgets. ///// Products Seen \\\\\ Grizzly Bandsaw: Magswitch Rewsaw Fence: Bandsaw Blade Used - 3/16", 4 TPI: Resaw Blade - Woodslicer: * Subscribe to the Drunken Woodworker YouTube channel: New Weekly Woodworking Wrap-u...

Band Saw Resaw Method - Woodworking - How To Make Wood Veneer Sheets

Band Saw Resaw Method - Woodworking - How To Make Wood Veneer Sheets

Band saw resaw video - Woodworking method - Watch how to make wood veneer sheets in the workshop the easy way. Woodworker can learn how to make your own wood veneer by following the simple woodworking techniques in the Youtube video clips. The woodworking online lessons show how use a Rockler thin r...

Blue Steel Machinery Co    Horizontal Band Resaw, Band Resaw   Band Saw, Thin Kerf Band Resaw, Log S

Blue Steel Machinery Co Horizontal Band Resaw, Band Resaw Band Saw, Thin Kerf Band Resaw, Log S

Blue Steel Machinery Co Horizontal Band Resaw, Band Resaw Band Saw, Thin Kerf Band Resaw, Log S...

Resawing With My 14" Bandsaw

Resawing With My 14" Bandsaw

Showing off the resaw capacity of my 14" bandsaw. This 14" bandsaw can resaw to nearly 12" wide, using a regular 93" blade...

Resawing Elm.mp4

Resawing Elm.mp4

18" Rikon Bandsaw, Blade: Lenox Trimaster Carbide Tipped 1"x.035" x 142" x 2/3 tpiThis thing cuts like butter.I had just made the larger cuts (approx 10") and had turned the log 90 to get more of a quarter sawn butter. I actually went a bit faster than I normally feed it, bu...

How-to Mill Large Logs On Your Shop Bandsaw

How-to Mill Large Logs On Your Shop Bandsaw

Table, Guide and Sled for Milling large Logs with a regular Woodshop Bandsaw. Visit for more information about this and other projects...

Luja Sawtech - Optimisation Of A Ake 245 Resaw Band Saw

Luja Sawtech - Optimisation Of A Ake 245 Resaw Band Saw

Results from the optimisation of a AKE 245 resaw band sawThe Mill is only processing 4, 9 m logs, unsorted Achieved increased feed speed by 19%Facts:Blade speed: 44m/secTooth pitch: 45 mmCut per tooth: from 0, 9 to 1, 23 mmWood: Spruce from mid SwedenFor more information, visit...

Woodworking Tips: Band Saw - Resawing

Woodworking Tips: Band Saw - Resawing

Woodworking Tips: Band Saw - George Vondriska provides instruction on how to select the proper side of the wood to cut a veneer and blade selection to achieve a great piece of veneer. A WoodWorkers Guild of America (WWGOA) original video. Visit for more videos, plans, tips & more!...

Woodworking Project Tips: Band Saw - Cutting A Log On A Bandsaw

Woodworking Project Tips: Band Saw - Cutting A Log On A Bandsaw

Woodworking Project Tips: Bandsaw - George Vondriska provides tips on how to use your bandsaw as a sawmill. A WoodWorkers Guild of America (WWGOA) original video...

Bandsaw Resawing Cut logs into lumber, make thin boards from thick and cut your own veneer. By George Vondriska Perhaps you want to cut 3/4-in.-thick material down to 3/8 in., or make veneer from that one precious figured board. Or maybe you want to get useful lumber from a gorgeous piece of wood in...

Woodworking Project Tips: Band Saw - Cutting a Log on a Bandsaw by WoodWorkers Guild Of America...

Milling a log on the bandsaw (a bit of bandsaw abuse) - YouTube by Matthias Wandel...

Mj3709a 35" Horizontal Mobile Sawmill - Buy Mobile Sawmill,horizontal Bandsaw…

Woodworking Project Tips: Band Saw - Cutting A Log On A Bandsaw

MJ3709A 35" horizontal mobile sawmill 1.Max dia:1.0 m 2.Motor:22KW 3.ISO9001-2008 4.Working vedio free...

SUPER UNFANCY BANDSAW LOG SLED - by jeffwedekind @ ~ woodworking community...

Bandsaw sled for milling small logs...

TedsWoodworking Plans and Projects