Thien Dust Collector Plans

TedsWoodworking Plans and Projects

Discover free woodworking plans and projects for thien dust collector. Start your next project for thien dust collector with one of our many woodworking plans. Woodworking project plans available for immediate PDF download.

Woodworking Projects & Plans for "Thien Dust Collector Plans":

Modified Harbor Freight Dust Collector Video 2 - 065

Modified Harbor Freight Dust Collector Video 2 - 065

Full article here: My new modified Harbor Freight 2hp dust collector. I used the included ring to make a thien baffle that sits on top of a metal trash can. The exhaust is vented outside. No problems with negative pressure as I barely run the HVAC in the shop. Like and Subscribe if you like what you...

Thien Dust Separator

Thien Dust Separator

I made a Dust Separator for my dust collector. I didnt give any instruction on how I did it because there are quite a few videos on this style separator. A really good video that gives step by step instructions to something close to what I have is by ghostses. Ghostses Thien Top Hat Seperator: Music...

Harbor Freight 2hp Dust Collector With Wynn 35a Filter And Thien Baffle Pre-separator Setup

Harbor Freight 2hp Dust Collector With Wynn 35a Filter And Thien Baffle Pre-separator Setup

Cart Dimensions: 22.5" x 44" Harbor Freight 2HP Dust Collector: Wynn Environmental 35A 80/20 Paper Filter: Thien Baffle: ?board=1.0...

Thien Dust Separator - Tablesaw Test

Thien Dust Separator - Tablesaw Test

See my Thien separator in action as I clean up all the dust and debris that is accumulated in my table saw cabinet. Some information and photos are at...

Diy Dust/chip Collector System - Cheap & Easy

Diy Dust/chip Collector System - Cheap & Easy

After watching lots of DIY dust collection systems I came up with an even simpler build using two buckets, very little cutting, and mostly scrap materials laying around the shop. This system works extremely well and can be built in a couple hours or less. It could also be enlarged with a frame struc...

Finishing Up The Dust Collector Build

Finishing Up The Dust Collector Build

A lot of details left to sort out. I'm working on a set of plans for this machine, but it always takes a long time to draw these up...

Modified Harbor Freight Dust Collector Video 1 - 064

Modified Harbor Freight Dust Collector Video 1 - 064

Full article here: My new modified Harbor Freight 2hp dust collector. I used the included ring to make a thien baffle that sits on top of a metal trash can. The exhaust is vented outside. No problems with negative pressure as I barely run the HVAC in the shop. Like and Subscribe if you like what you...

Dust Collector Separator Setup Using Thien Baffle

Dust Collector Separator Setup Using Thien Baffle

My rather unusual Jet 1100DC dust collector with thien baffle setup to show my friends at...

Modified Harbor Freight Dust Collector Final Test - 078

Modified Harbor Freight Dust Collector Final Test - 078

Full article here: FINALLY the dust collection is 100% done. As promised, here is a complete clip showing the performance of the Thien baffle modification. By far the best addition to my shop. 7:35 The whole pile sucked up 8:33 A second look inside the can 9:09 Dust outside 9:31 No clog in the baffl...

Homemade 3hp Cyclone Dust Collector

Homemade 3hp Cyclone Dust Collector

A video about my homemade dust collector for the article on Link to the SketchUp drawing: ?dl=0...

Building A Dust Collector

Building A Dust Collector

Using the blower and two bucket cyclone from previous videos to build a dust collector. Still lots of work left to finish it up...

On The Cheap Dust Collector. Thein Baffle.

On The Cheap Dust Collector. Thein Baffle.

This is a short video showing some tips and features of a diy dust collector. giving some key dimensions to make your own thein baffle separator. Disclaimer This video is not a "how to" they are just for entertainment purposes. Please use all safety precautions when operating power tools o...

066 Modified Harbor Freight Dust Collector Video 3

066 Modified Harbor Freight Dust Collector Video 3

Full article here: My new modified Harbor Freight 2hp dust collector. I used the included ring to make a thien baffle that sits on top of a metal trash can. The exhaust is vented outside. No problems with negative pressure as I barely run the HVAC in the shop. Like and Subscribe if you like what you...

Thien Baffle & Wynn Filter For Upgrade Harbor Freight Dust Collector-woodworking With Stumpy Nubs 35

Thien Baffle & Wynn Filter For Upgrade Harbor Freight Dust Collector-woodworking With Stumpy Nubs 35

STUMPY'S WEBSITE SUBSCRIBE This Week we make some upgrades to our single stage dust collector- A Thien Baffle and a Wynn filter. Plus a lot more!...

Homemade Dust Collector Upgrades (part 2): Inner Spiral And More

Homemade Dust Collector Upgrades (part 2): Inner Spiral And More

More detail here: Some more upgrades for my homemade dust collector...

Update- Thien Top Hat Dust Separator Build

Update- Thien Top Hat Dust Separator Build

Update- Thien Top Hat Dust Separator Build...

Building A Dust Collector Blower

Building A Dust Collector Blower

Using a cheap table saw motor to build an efficient blower for a dust collector You can get plans for this blower as part of my small dust collector plans...

Making The Thien-baffle (chip-separator Part 2)

Making The Thien-baffle (chip-separator Part 2)

A bigger project this time. I wanted to have a low profile separator to use with the jointer and planer, because the chips produced by this machine take up too much space in the dust collector bin. This video shows the procedure of making the Thien-baffle separator in detail...

Large Thien Baffle Top Hat

Large Thien Baffle Top Hat

This is my build of a Thien Baffle. The dust collector is a Jet DC-1100 VX, inlet directly connected to Thien baffle. The inlet piping has a 6" bellmouth and an air straightener. The Thien baffle inlet is also 6" and connected to the shop wide via 6" main metal pipe. My thanks to Phil...

Build This Sawdust Collection System

Build This Sawdust Collection System

This is the TKW's last word on dust collection. What you're about to see here will amaze you perhaps even stupefy you or maybe even leave you dumbfounded. Indeed, My Spiffy ShopVac (tm) is something you lonely dust collection souls have been searching for. You don't need any fancy tools, extensive p...

Build: Dust Separator

Build: Dust Separator

Simple to build top hat style dust separator with a Thien baffle. Everything that might need to be tuned is friction fit or screwed for easy disassembly. There are no official plans for this since the exact dimensions will depend on the trash can used and i designed it to be fully adjustable. Don't ...

Separador Ciclonico 1/2 - My Homemade Cyclon Dust Collector

Separador Ciclonico 1/2 - My Homemade Cyclon Dust Collector

Cmo transformar una aspiradora con bolsa en otra sin bolsa. Construyo el se`parador en madera, un trabajo de precisincon. Comenzamos el trabajo preparando las piezas de madera...

Characterizing The Cyclone

Characterizing The Cyclone

Experimenting with the Thien-baffle style cyclone on my small homemade dust collector...

Modified Harbor Freight Dust Collector Video 4 - 067

Modified Harbor Freight Dust Collector Video 4 - 067

Full article here: My new modified Harbor Freight 2hp dust collector. I used the included ring to make a thien baffle that sits on top of a metal trash can. The exhaust is vented outside. No problems with negative pressure as I barely run the HVAC in the shop. Like and Subscribe if you like what you...

Homemade Dust Collector Cyclone Or Vortex Cone - How To Retrofit Your Machine

Homemade Dust Collector Cyclone Or Vortex Cone - How To Retrofit Your Machine

Want a vortex cone for your dust collector but don't want to buy an expensive one or buy a cyclone separator? In this video I explain how I retrofitted my Jet 1.5 HP 1100 CFM Canister style dust collector with a homemade vortex cone. I was dealing with a filter that would get full of dust and wood c...

Modified Harbor Freight Dust Collector Video 5 - 068

Modified Harbor Freight Dust Collector Video 5 - 068

Full article here: My new modified Harbor Freight 2hp dust collector. I used the included ring to make a thien baffle that sits on top of a metal trash can. The exhaust is vented outside. No problems with negative pressure as I barely run the HVAC in the shop. Like and Subscribe if you like what you...

Homemade Dust Collector Upgrades (part 1): New Impeller

Homemade Dust Collector Upgrades (part 1): New Impeller

More detail here: Some upgrades for my homemade cyclone dust collector. This video just covers making a new impeller. See more upgrades in my next video...

Thien Dust Shavings Collector Quick & Simple

Thien Dust Shavings Collector Quick & Simple

I've been meaning to make a collector for my vac for a long time because the filter bag sticks down into the container & when you get enough in it slows suction down & empties itself onto the floor when it's opened for emptying :( , yesterday i found a container at the local tip & today ...

Diy Dust Collector Shop Vac Finished Cart

Diy Dust Collector Shop Vac Finished Cart

This is a super simple cart to hold a DIY dust and wood chip collector. The collector is extremely simple. It's just two buckets with hand clamps and two pieces of PVC - one vertical and the other entering on the side. On my channel I have the easy build of the collector. The cart has space to hold ...

How To Make A Dust Collector With A Wet/dry Vac

How To Make A Dust Collector With A Wet/dry Vac

In my new shop, I needed dust collection, but didn't have room for a huge collector. Instead, I used a wet/dry vac and a cyclone, along with some blast gates. A list of parts that I used can be found at I'd like to give special thanks to Nick McMahon, for his support of ILTMS via You're awesome Nick...

Dust Collector Separator setup using Thien Baffle - YouTube by Jason Beam...

6" Top hat thien baffle - by UpstateNYdude @ ~ woodworking community...

The cyclone is the key...

Made by John: My Thien Dust Collector...

Homemade cyclone...

Thien Top Hat dust collector separator, Thein baffle, and 3 station manifold - by mbs @ ~ woodworking community...

Thien Cyclone - Woodworking Talk - Woodworkers Forum...

Dust Separator - from plans in Shopnotes #55 - by Jeremy Greiner on Lumberjocks...

Cyclone separator lid with baffle - by unrested001 @ ~ woodworking community...

Thien separator parts sources - Google Search...

My Homemade Cyclone or My Version of the Thien Separator Lid with Baffle, part 3 of 3...

Thien Baffle Wynn Filter for upgrade Harbor Freight Dust Collector-Woodworking with Stumpy Nubs 35 by Stumpy Nubs...

Thien dust shavings collector quick & simple by Gid joiner...

Making an Internal Thien Baffle for a HF Dust Collector - by Rex B @ ~ woodworking community...

Well designed Thien Separator for a shopvac...

❧ Made by John: My Thien Dust Collector...

J. Phil Thien's Cyclone Separator Lid w/ the Thien Cyclone Separator Baffle...

Thien baffle in dust collector...

Adding a Thien Baffle to a Harbor Freight DC...

Forget the Dust If you read this article be sure to scroll down after you get the "to be continued" message. The entire article is here...

Harbor Freight 2hp Dust Collector with Wynn 35a Filter and Thien Baffle Pre-Separator Setup - YouTube by thesergeant...

DIY Clear Thien Dust Separator by johnisnot...

Dust collector with built in thien baffle dust separator...

Thien Baffle Separator #1: Design Stages - by Lance @ ~ woodworking community...

Thien Top-Hat Design for collecting saw dust in the shop...

TedsWoodworking Plans and Projects